Last updated: November 22, 2026
WattCostCalculator publishes one kind of page: a worked example of what an appliance costs to run in a U.S. home. Every number on those pages is meant to be traceable, and this page explains where the numbers come from, how they are checked, and how errors are corrected.
Who writes and maintains the guides
The guides and calculators are written and maintained by Seon (Seungil Lee), who founded the site in October 2026. The About Us page has the background, and the author archive lists every guide published here.
How the cost figures are calculated
Every page uses the same arithmetic: rated watts multiplied by hours of use, divided by 1,000 to give kilowatt-hours, multiplied by the price per kilowatt-hour. Where it matters, a duty-cycle adjustment is applied as well, which is the share of the hour an element or compressor is actually running. The formula is printed on the page, and the calculator on the page uses exactly that arithmetic, so a reader can substitute their own rate and hours and get their own answer.
Where the data comes from
- Electricity prices: the U.S. Energy Information Administration’s Electric Power Monthly, Table 5.6.A, average price of electricity to ultimate customers in the residential sector. Each page names the edition it uses, for example August 2026 data at 18.16 cents per kilowatt-hour.
- Rated power: the manufacturer’s own product page or specification sheet for the model named. Where a maker does not publish a figure, the page says which retailer listing was used and treats that number as a ceiling rather than a measurement.
- Context: U.S. Department of Energy and ENERGY STAR material on appliance energy use, and utility rate schedules where a page discusses time-of-use pricing.
Two rules applied to every figure
First, no number appears without a source a reader can check, and each page ends with a sources and method section listing those sources. Second, a manufacturer’s wattage is treated as maximum draw, not average use, which is why pages show a range as well as a single value. Where a figure could not be confirmed, it was left out of the tables rather than estimated silently.
Review dates and updates
Each guide carries a last-checked date. Rates are refreshed when the EIA publishes a new monthly edition, and specifications are corrected when a maker changes a product page. Updates are made a few pages at a time rather than in bulk, and a page’s date changes only when its figures or text actually change.
Corrections
If a figure is wrong or a specification has changed, write to contact@wattcostcalculator.com with the page address. Confirmed errors are corrected and the page is re-dated, and a substantive correction is noted in the page text.
How pages are produced
Drafts are prepared with software assistance and then checked line by line against the sources cited on the page before publication, with the wording, calculations and tables reviewed by the editor. A page is published only when its rated wattage and rate figures trace to a source listed in its own sources section.
Advertising and independence
The site is supported by display advertising, including Google AdSense. Advertisers do not choose, review or approve editorial content, and no brand pays for a favorable ranking or placement. Product names and model numbers are used for identification only, and the site is not affiliated with the manufacturers named on it.