Laundry Cost per Load: Electricity for Washing and Drying

Laundry cost per load depends on the washer, dryer, and home energy rate. Looking only at the washing machine can miss much of an electric wash-and-dry routine: the load still has to be dried. This guide combines both steps so you can estimate a complete load using your own cycle readings.

Illustrative example: At 18.16¢/kWh, a combined 3.2 kWh wash-and-dry cycle costs about $0.58 per load. Five loads a week would be about $12.59 per average month or $151.09 a year. The starting total combines washer and dryer energy; the breakdown below shows which part of your routine is worth checking first.

Where I would look first: the drying step

Start by splitting one basket into two readings. For the editable 3.2-kWh example, suppose washing accounts for 0.2 kWh and drying for 3.0 kWh, with electric water heating excluded. That puts about 94% of this particular total in drying. It is a scenario breakdown, not an average for all machines, but it gives you a useful diagnostic question: which stage dominates your own routine?

If a change cuts 0.5 kWh from each dry cycle, five loads a week save about $23.61 per year at 18.16¢/kWh. A smaller electricity saving may still be worthwhile, but this scale keeps equipment-purchase expectations realistic.

How to calculate the cost of one load

Use the washer and dryer kWh for the same basket, then multiply the combined energy by your rate:

Cost per load = combined kWh × electricity rate in dollars per kWh

For example, 3.2 × $0.1816 = $0.58112, or about 58¢. To estimate a year, multiply by weekly loads and 52. Divide by 12 for an average month.

Estimate your laundry total

Enter kWh for one complete load, loads per week, and the cents-per-kWh rate from your bill. Change the example values to fit your household.

Build your wash-and-dry total

Add water-heating electricity only when it is outside your washer reading. Gas, water and detergent costs are separate.

Choose an example or enter your values, then calculate. Rate reference: EIA August 2026 residential averages, released October 23; checked and reflected November 9, 2026. Examples are editable assumptions. Estimates cover entered electricity only. Method & limitations.

Rate reference: EIA August 2026 U.S. residential average, 18.16¢/kWh; released October 23 and checked November 9, 2026. Enter the combined kWh for the same basket.

What counts as one complete load?

Add the electricity used by a full wash cycle and the matching dry cycle. Use readings or reliable appliance energy information where possible. Keep the same basket and comparable cycle settings; a small washer load followed by an unrelated large dryer load will distort the comparison.

A washer’s electricity reading may not include energy used to heat incoming water. If an electric water heater supplies a hot wash, its energy is outside the washer’s own reading. If the water heater uses gas, account for that fuel separately. Our cold-vs-hot washing machine guide explains the difference.

Example budget at different laundry frequencies

These examples hold 3.2 kWh per combined load and 18.16¢/kWh constant. Only the weekly load count changes.

Loads per weekEnergy per weekAverage-month estimateYear estimate
26.4 kWh$5.04$60.56
516 kWh$12.59$151.09
825.6 kWh$20.15$241.69

At five loads a week, a 2.0 kWh combined cycle would cost about $7.87 per average month at the same rate. If your dryer uses gas, do not add its gas consumption as electric kWh; calculate the washer’s electricity here and consider gas cost separately.

How to get a more useful estimate

  1. Measure the whole routine: add washer and dryer kWh for the same load.
  2. Check what is excluded: washer-only readings can omit water heating. An electric dryer is a high-voltage appliance; use appliance energy information or a suitable professionally installed meter, not an ordinary plug-in meter.
  3. Choose the right bill rate: use the energy-related cents/kWh that apply to your usage. For time-of-use plans, the price can depend on when the cycle runs. Fixed monthly fees do not vanish if you run fewer loads.
  4. Compare like with like: load size, spin speed, fabric, sensor settings, and extra drying time affect the result.

Towels and shirts need different comparisons

A load of towels entering the dryer wet is a different job from a basket of lightweight shirts. ENERGY STAR’s dryer guidance recommends room for clothes to tumble and explains that automatic termination can help avoid overdrying. More drying minutes are not necessarily a better result.

For your next normal laundry day, note the load contents, washer spin setting, dryer program, any extra drying time and cycle kWh if available. Change one factor at a time while keeping a similar basket. I would check for repeat drying and unsuitable loading before deciding a new machine is necessary. Follow fabric care labels and appliance instructions when changing settings.

Would a heat-pump dryer reduce the total?

It may reduce the drying energy, but the household benefit depends on actual kWh per load and how often you dry. Compare similar cycles and also consider purchase price, cycle duration, installation, and maintenance. Our heat-pump vs. conventional electric dryer guide covers those trade-offs. A higher-priced model is not automatically worthwhile for occasional use.

What the calculator excludes

This estimate covers the kWh and electricity rate entered. It excludes water, sewer, detergent, gas, fixed bill charges, taxes, and time-of-use breakdowns unless you model them separately.

Frequently asked questions

Is 3.2 kWh typical for every load?

No. It is an editable example. Appliance type, settings, water temperature, and load size can change actual energy.

Can I use rated watts for a dry cycle?

Watts multiplied by time gives a rough scenario, but thermostat-controlled equipment may not draw rated power continuously. A measured or labeled cycle kWh is more useful.

Should hot-water heating be included?

Include it when estimating total laundry energy and the water is heated electrically. Keep it separate for gas water heating or when your measurement already includes it, to avoid double counting.

Try your own readings above, and browse our Laundry Appliances guides for related comparisons.

Related reading: For the drying portion of a laundry load, compare our electric dryer cost breakdown.

Sources and method

Updated October 29, 2026: added a washer/dryer energy breakdown and a practical load-comparison checklist.

Calculate the whole load once

Add washer electricity, separately heated water if applicable, and dryer electricity. An example of 0.2 + 0.4 + 2.8 kWh gives 3.4 kWh, or 68¢ at 20¢/kWh. If the wash figure already includes water heating, skip the separate 0.4 kWh so it is counted only once.

Estimate the cost with your own inputs

The starting values match this article’s 3.2 kWh complete wash-and-dry scenario and five loads per week. Change cycle energy and weekly loads to your own laundry routine.

Formula for laundry cost per load: kWh per load times electricity rate
Cost formula with the U.S. EIA residential average rate.

What would this cost in your home?

Adjust the starting values to match your appliance and electricity plan.

Enter your values, then select Calculate my cost. Estimated energy cost in USD; fixed bill charges excluded. Annual = 52 weeks; average month = annual / 12. Method & limitations

Open the full electricity cost calculator

Disclaimer: The figures on this page use statewide or standardized averages and the inputs shown. They are for general information only, not a utility quote, a bill, or financial advice. Check your own electricity bill and the official EIA or manufacturer sources for current figures.